MT-1LDS3 Single Lane Modular Drag Strip (3 sections)

This is a fully assembled and painted single lane drag strip in 3 sections.
Ready to Run for the serious racer at home to test launch their cars. Total length of 3 sections x 1.8m = 5.4m
We try to keep at least one 3-piece strip in stock all the time.
Please phone (03-9796-3830) ahead to check if we have one in stock.
The final product has our special black coating for extra grip.
Includes ...
Three ready-to-run painted and finished drag strip sections each 180cm long.
83mm tall side walls.
Our MrTrax coupling system.
Toggle clamps mounted.
6.3mm wide Tinned Copper braid
Selectable shutdown zone in 3 different modes (dynamic braking).
You can add more sections at any time to lengthen the strip or braking zone.
Includes a wiring harness installed with a 3-pin plug to connect to your controller (as used at Commercial Raceways). It can be customised to suit your controller plug also!
The wiring harness also has a power lead with banana plugs to connect directly into a DC power supply.
Optional flat pack legs are also available. You'll need 2 legs per section.
You might also want a 1,000-watt 12-30 Volt DC power supply to launch power hungry drag motors. Available here!
The whole 3-piece system packs down to approx. 20cm x 24cm x 190cm long
Each module is 180cm long. The sides are 83mm tall and are rebated to fit snuggly on the sides of the track keeping it straight and true. They have our very own coupling system which ensures a pure flat and reliable electrical connection every time. The 2 toggle clamps on each module ensure the sections stay locked together. The end module can be wired (supplied) for Dynamic Braking.
All you need now is a flat surface to place the test strip onto and lock together as many sections as you want. You can now make unlimited changes to your car and test launch it until you have the right balance. Now you're ready for the green light at your local Drag Racing club.